How Much Does Gas Line Repair Cost?

Repairing a natural gas line costs $150 to $700, about $400 on average, according to Fixr (Aug 2025). Where the leak sits decides the price: a junction behind a stove runs $120 to $250, one hidden in a wall or crawl space $270 to $760, and a buried line adds $1,500 to $5,000 for excavation. Compare repair against replacement below, check which costs fall to BGE rather than to you, and see the permit and testing a quote can leave out.

Smell gas? Leave first and call 911 or BGE at 877.778.7798. Read the price later.

Typical costs at a glance

Gas line repair
$150 to $700
Gas leak repair
$150 to $800
Leak at an appliance
$120 to $250
Leak inside a wall
$270 to $760

National ranges from Fixr and HomeAdvisor.

Before the price: what to do if you smell gas

Leave the building first, go at least 100 feet away, then call 911 or BGE at 877.778.7798 from where you are standing. BGE's instruction is to get out before calling, and its three "don'ts" are explicit: don't turn anything off, don't open a window, don't try to find the leak. Its brochure adds not to use matches or to turn anything on or off, "even a cell phone."

BGE answers emergency gas calls 24 hours a day and charges nothing to investigate one. Do not assume a neighbour has already called, and do not go back inside until authorities say it is safe. A house with no gas appliances can still have a gas leak from outdoors.

Why the same leak costs $120 or $5,000

Access sets the price, not the size of the leak. HomeAdvisor (Jun 2026) describes a leak at a junction behind a stove as a simple remove-and-replace repair at $120 to $250. The same leak inside a wall or crawl space costs $270 to $760 because it has to be found before it can be reached, and a buried line adds $1,500 to $5,000 for excavation and landscaping on top of the repair itself.

Gas leak repair cost by where the leak sits
Repair or chargeTypical costWhat the range coversReported by
Leak at an appliance junction$120 to $250A leak at an accessible junction, for example behind a stove: a straightforward remove-and-replace repair with no wall opening or excavation.HomeAdvisor (Jun 2026)
US national
Leak in a wall or crawl space$270 to $760A hidden leak behind drywall or in a crawl space, which is harder to locate and reach. Angi's version of the same figure says the range includes drywall repair costs.HomeAdvisor (Jun 2026)
US national
Buried line: excavation added$1,500 to $5,000The amount excavation and landscaping add when the leak is in a buried line. This is an add-on to the repair itself, not a standalone total. Angi gives the same $1,500 to $5,000 and says it includes excavation and landscaping; HomeGuide reports $1,500 to $3,000+ for the same work.HomeAdvisor (Jun 2026)
US national
Trenching$5 to $12 per footDigging the trench to lay a buried gas line, separate from the pipe work. Angi and Bob Vila both give $4 to $12 per foot. Landscape repair afterwards is extra ($300 to $10,000 on the same page).HomeAdvisor (Jun 2026)
US national

Market ranges, not quotes from Speedy Plumbing Baltimore. Sources: HomeAdvisor: How Much Does Gas Line Installation Cost in 2026? (updated Jun 2026). Retrieved 2026-09-22.

What does it cost to find a gas leak?

Finding a gas leak is billed as a pressure test or an inspection, not as a separate detection service. Angi (Mar 2026) puts a gas line pressure test at $75 to $150, and HomeAdvisor (Jun 2026) puts a yearly gas line inspection at $50 to $75. No major cost publisher prices gas leak detection the way it prices water leak detection.

The fuel gas code sets how the test is done: a pressure test of at least 3 psig held for at least 10 minutes in a single-family dwelling, with leaks located using an approved gas detector or a non-corrosive leak detection fluid. Household soap solutions are not a substitute — CSST manufacturer Gastite warns that they contain chlorides and that only a solution labelled non-corrosive should be used on its tubing.

When a repair becomes a replacement

Replacing gas pipe costs $23 to $35 per foot, and a whole house runs $3,000 to $8,000, according to Fixr (Aug 2025). Fixr (Aug 2025)'s per-foot figure includes removing the old line as well as installing the new one, so it is not comparable to a new-installation rate of $15 to $30 per foot.

Corrosion is what usually forces the decision on a buried line. BGE tells customers that piping after the meter is theirs to maintain and that "if such piping is not maintained, it may corrode and become a potential source for a leak." The code takes the same view: zinc coating "shall not be deemed adequate protection for underground gas piping," so buried steel needs corrosion-resistant material, a factory-applied coating or monitored cathodic protection.

Gas line replacement and new installation costs
Repair or chargeTypical costWhat the range coversReported by
Replace existing line (remove and install)$23 to $35 per footReplacing existing gas pipe, including removing and disposing of the old line and installing the new one. Higher than a new install for the same reason. HomeGuide reports $15 to $35 per foot for the same work.Fixr (Aug 2025)
US national
New line, per foot$15 to $30 per footPer-foot price for a new gas line, from HomeAdvisor's project-type table. Angi gives $15 to $25 per linear foot and Fixr $10 to $25; Forbes Home is far higher at $30 to $75.HomeAdvisor (Jun 2026)
US national
Whole-house replacement$3,000 to $8,000Re-piping all the gas lines in a house, as opposed to replacing one damaged run (which Fixr puts at $300 to $800). Bob Vila gives $3,000 to $7,000 and HomeGuide $3,000 to $7,000 for the same job.Fixr (Aug 2025)
US national
New gas line, whole job$271 to $936Installing a natural gas line, covering labor, pipe and fittings. HomeAdvisor says some jobs run as little as $120 or as high as $2,000. Permits ($100 to $300) and landscape repair ($300 to $10,000) are extra. Fixr reports a much higher range ($500 to $2,000, averaging $800) for the same work.HomeAdvisor (Jun 2026)
US national

Market ranges, not quotes from Speedy Plumbing Baltimore. Sources: Fixr: How much does it cost to repair a gas line? (updated Aug 2025); HomeAdvisor: How Much Does Gas Line Installation Cost in 2026? (updated Jun 2026). Retrieved 2026-09-22.

The line from the street is not on this bill

BGE owns the gas pipe up to and including the meter; you own everything after it. BGE's own wording is "BGE owns all pipes, underground and above ground, up to and including the gas meter," and "customers own and maintain all above ground and buried pipe after the meter, and their gas appliances."

That line decides who pays. BGE investigates a reported gas odor free of charge, makes the area safe and repairs BGE's equipment at no cost. But if the leak turns out to be on customer-owned equipment, BGE may shut the gas off to make the property safe, and the inspection and repair become yours. None of the $271 to $936 installation figures on this page cover running gas from the street to the meter — that is BGE's service line, quoted by BGE, on a different basis.

Baltimore County's code says the same thing from the other direction: the utility service, the main shutoff valve, the regulator and the meter sit outside the scope of the code a plumber works to.

Costs a gas quote may leave out

  • Permit. HomeAdvisor (Jun 2026) puts permit fees at $100 to $300 nationally. In Baltimore City the fee for gas piping in a 1- or 2-family home is $25, and a permit is issued only to a City-licensed master plumber, master gas fitter or on-site utility contractor.
  • Pressure test after the repair. The code requires the affected portion to be repaired or replaced and retested. Angi (Mar 2026) puts a test at $75 to $150.
  • Shut-off valve. Replacing a gas shut-off valve averages $300 to $600, according to Fixr (Aug 2025), with the valve itself $150 to $350 of that.
  • After-hours premium. Fixr (Aug 2025) notes an extra $200 to $300 per visit for emergency same-day service. Speedy Plumbing Baltimore does not add one.
  • Excavation and restoration. Trenching runs $5 to $12 per foot, and the $1,500 to $5,000 buried-line figure covers landscaping as well as digging.

Why a gas quote is never the cheapest quote

Maryland law requires a licence to work on gas piping, and the do-it-yourself exception does not cover it. The statute's exception for work in your own residence applies to plumbing services only; natural gas services are excluded from it. Providing natural gas services without a Board licence is not permitted, and a business needs a master natural gas fitter who actively directs and is responsible for the work.

Baltimore County is a separate system: the State Board's own page says licences are required statewide "except for Baltimore County and the areas served by the Washington Suburban Sanitary Committee," which "issue their own licenses and have their own plumbing code." In the County, only a County-licensed plumbing or gasfitting contractor can pull a gasfitting permit.

How Speedy Plumbing Baltimore prices gas line work

Speedy Plumbing Baltimore gives you an upfront price after testing the line, and work starts only after you approve it; see how our Baltimore gas line repairs work. A leak found at night or on a weekend is billed at the same rate as a weekday call. The ranges on this page are published national figures, not our quotes.

Gas line cost questions

How much does gas line repair cost?

Fixr (Aug 2025) puts gas line repair at $150 to $700, with $400 as the average for a section of damaged pipe. A leak at an appliance junction runs $120 to $250 and one hidden in a wall or crawl space $270 to $760, according to HomeAdvisor (Jun 2026).

How much does it cost to fix a gas leak?

Fixr (Aug 2025) puts a gas line leak repair at $150 to $800. Finding the leak is billed separately as a pressure test at $75 to $150 or an inspection at $50 to $75; no major publisher prices gas leak detection as its own service.

Does BGE fix a gas leak for free?

BGE investigates a reported gas odor free of charge, 24 hours a day, makes the area safe and repairs its own equipment at no cost. BGE owns the pipe up to and including the meter. If the leak is on customer-owned piping or appliances after the meter, BGE may interrupt the gas supply and the inspection and repair are the customer’s responsibility.

How much does it cost to run a new gas line?

HomeAdvisor (Jun 2026) puts a new natural gas line at $271 to $936, averaging $598, and $15 to $30 per foot per linear foot. That covers the branch line inside the property, not the service line from the street, which BGE installs and quotes separately.

Can I repair a gas line myself in Maryland?

No. Maryland’s exception for work you do in your own residence covers plumbing services and does not extend to natural gas services, so a Board licence is required. Baltimore County runs its own licensing through its Plumbing and Gasfitting Board, and only a County-licensed contractor can pull a gasfitting permit there.

Why is a buried gas line so much more expensive to repair?

Excavation and landscaping add $1,500 to $5,000 on top of the repair, according to HomeAdvisor (Jun 2026), and trenching alone runs $5 to $12 per foot. Maryland law also requires a Miss Utility ticket before digging, with work starting no sooner than 3 business days after the ticket is initiated.

Compare other repair costs

Service calls, hourly rates and leak repairs are listed in the complete table of plumbing repair costs. Water-side breaks are covered in what a burst pipe repair costs, and buried sewer work in sewer line replacement pricing.

Gas line tested and made safe?

Call Speedy Plumbing Baltimore for an upfront price once BGE has cleared the property. The line is answered 24 hours a day.

Call (716) 328-9097
Call 24/7: (716) 328-9097